Service Bulletins

Stay informed on the latest Service Bulletins from International Safety Products Ltd. Safety bulletins contain important product information and maintenance instructions.

Bulletin Number 013

December 11, 2014

Dec/14

Service Bulletin issued in regards to fake labels on Hammar A1 inflators

Download Bulletin | 459 KB


Bulletin Number 012

September 26, 2014

Sept/14

Halkey Roberts Pro 1F Locking Ring - Service Stations

Download Bulletin | 631 KB


Bulletin Number 011

July 18, 2013

February 2012 - UML Cartridges

This bulletin affects all ISP manufactured products including Lifejackets and Bladder Assemblies fitted with United Moulders (UML) Automatic Inflator Cartridges.

Download Bulletin | 786.88 KB


Bulletin Number 010

July 18, 2013

UML Manual Override Sealing Cap Safety Notice

Notification of a Safety Alert issued by the Manufacturer of United Moulders Inflators. United Moulders (UML) Mk5 or Mk5i Automatic Inflator Cartridge, but specifically only when used with the white coloured UML “manual only over-ride” sealing cap.

Download bulletin


Bulletin Number 009

July 18, 2013

October 2011 (Hammar Safety Alert)

Notification of Safety Information issued by the Manufacturer of Hammar Inflators (CM Hammar AB). This Service Bulletin and Safety Alert reiterates the previous Service Bulletin (No' 002/Jan/09 ) issued at the beginning of 2009 following a similar Safety Notice issued by CM Hammar AB

Download Bulletin | 121.34 KB


Bulletin Number 008

July 18, 2013

Clarification on the sequence of disassembly and re-arming op heads.

This bulletin clarifies the sequence of disassembly and re-arming operating heads on aISP manufactured products including Lifejackets and Bladder Assemblies fitted with AUTOMATIC INFLATION MECHANISMS EXCLUDING HAMMAR MECHANISMS.

Download Bulletin | 211.77 KB


Bulletin Number 007

July 18, 2013

Check weighing cylinders on lifejackets fitted with Hammar MA1 Inflators

When inflating and deflating ISP lifejackets during a service and the oral tube has the new style Halkey Roberts green coloured valve core fitted (Photo 1), the existing oral tube adaptor from ISP with the part number 70-ISP-SVR-004 must not be used. A new universal oral tube adaptor with the ISP part number 70-ISP-SVR-009 is available from ISP which should be used. The new oral tube adaptor is compatible with the new oral tube and oral tube valve core, and is also suitable for use with all current oral tubes and oral tube valves used in ISP products except products where a Halkey Roberts Twist Lock valve has been fitted.

Download Bulletin | 90.97 KB


Bulletin Number 006

July 18, 2013

New oral tube valve design.

When inflating and deflating ISP lifejackets during a service and the oral tube has the new style Halkey Roberts green coloured valve core fitted (Photo 1), the existing oral tube adaptor from ISP with the part number 70-ISP-SVR-004 must not be used. A new universal oral tube adaptor with the ISP part number 70-ISP-SVR-009 is available from ISP which should be used. The new oral tube adaptor is compatible with the new oral tube and oral tube valve core, and is also suitable for use with all current oral tubes and oral tube valves used in ISP products except products where a Halkey Roberts Twist Lock valve has been fitted.

Download Bulletin | 90.97 KB


Bulletin Number 005

July 18, 2013

Bulletin 005

This bulletin describes how to replace the valve core assembly on an ISP manufactured product if the manifold is the black coloured moulded type from Halkey Roberts

Download Bulletin | 155.44 KB


Bulletin Number 004

July 18, 2013

July/09

Service Bulletin regarding the lugged gasket replacing the use of the O-Ring as the cylinder seal on Halkey Roberts Alpha Inflators.

Download Bulletin | 69.33 KB


Get this feed  codestrat concrete5 addon development
« Previous12Next »